50kW 65kVA Cummins Silent Diesel Generator Set 4BTA3.9-G2

Cummins Engine | Stamford Alternator | 50Hz/60Hz | 3 Phase | ATS Optional

Share to:

Description

Core Specifications

The HONGTAI silent diesel generator set is powered by a Cummins 4BTA3.9-G2 diesel engine, coupled with a genuine Stamford alternator and SmartGen digital controller. The standard configuration below is for 50Hz, 400/230V, 3 phase, 4 wire applications.

Product NameHONGTAI 50kW Cummins Silent Diesel Generator Set
Prime Power50kW / 62.5kVA
Standby Power55kW / 68.75kVA
Power Factor0.8 lagging
EngineCummins 4BTA3.9-G2
AlternatorGenuine Stamford brushless synchronous alternator
ControllerSmartGen digital automatic generator controller
Frequency / Speed50Hz / 1500 rpm
Rated Voltage400/230V
Phase / Wiring3 phase, 4 wire
Rated Current90.2A at 400V, 50Hz, 0.8 power factor
Starting SystemElectric start
EnclosureWeather-protected sound-attenuated silent canopy
ATSOptional

Important: 50kW equals 62.5kVA at a 0.8 power factor. “65kVA” may be used as a market model class, but the technical specification should state 50kW / 62.5kVA prime power and 55kW / 68.75kVA standby power.

Product Overview

The HONGTAI 50kW Cummins silent diesel generator set is designed for reliable standby power and suitably specified prime-power applications. It combines a Cummins 4BTA3.9-G2 industrial diesel engine, a genuine Stamford alternator and SmartGen automatic control system for stable output and practical daily operation.

The weather-protected soundproof canopy is suitable for outdoor installations, commercial buildings, farms, workshops, construction sites and other locations where dependable power and controlled operating noise are required. Voltage, frequency, ATS, fuel tank and canopy details can be configured to suit the project.

Cummins 4BTA3.9-G2 Engine Specifications

ManufacturerCummins
Engine Model4BTA3.9-G2
Engine Type4-stroke, in-line, 4-cylinder diesel engine
Displacement3.9L
Bore × Stroke102mm × 120mm
Compression Ratio17.3:1
Cooling SystemWater-cooled
Air IntakeTurbocharged and aftercooled
Fuel SystemDirect injection diesel fuel system
Rated Speed1500 rpm for 50Hz configuration

Fuel Consumption

Typical fuel-consumption values for the 50Hz / 1500rpm, 50kW prime-power configuration:

  • At 100% prime load: approximately 12.9 L/h
  • At 75% prime load: approximately 10.0 L/h
  • At 50% prime load: approximately 7.0 L/h
  • At 100% standby load: approximately 14.1 L/h

Service Data

  • Lubricating-oil capacity: approximately 10.9L
  • Engine-only coolant capacity: approximately 8.3L
  • Fuel consumption varies with load, altitude, ambient temperature, fuel quality and final generator-set configuration.

Genuine Stamford Alternator

The generator set is equipped with a genuine Stamford alternator selected to match the 50kW output, 400/230V voltage and 50Hz frequency. The supplied alternator model is identified on its genuine manufacturer nameplate and may vary according to final voltage, frequency and project requirements.

BrandStamford
TypeBrushless synchronous alternator
Excitation SystemSelf-excited with AVR
Phase3 phase
Power Factor0.8 lagging
Insulation ClassClass H
Protection ClassIP23
CouplingDirect coupled, single bearing
Voltage RegulationAVR controlled

Authenticity: For traceability-sensitive projects, HONGTAI can provide actual alternator nameplate photos and relevant identification information with the final supply configuration.

Customizable Silent Canopy

The generator set is housed in a weather-protected sound-attenuated canopy designed for outdoor operation and convenient maintenance. The canopy includes service access doors, air-intake and exhaust ventilation, lifting points and a steel base frame.

Standard Features

  • Weather-protected steel silent canopy
  • Sound-attenuating insulation material
  • Lockable maintenance access doors
  • Integrated ventilation and exhaust silencer arrangement
  • Steel base frame with anti-vibration mounting arrangement

Customization Options

  • Canopy colour and customer logo
  • Fuel tank capacity and external fuel connection
  • Cable-entry direction and maintenance-door layout
  • Special sound-level treatment
  • Cold-climate, high-temperature or coastal-environment options

Overall dimensions, operating weight, fuel-tank size and measured sound level depend on the customized canopy and final accessory selection. These values are confirmed on the final factory drawing and test record.

 

SmartGen Control & Protection

The SmartGen digital controller provides automatic generator-set control, operating status monitoring, alarm display and protective shutdown functions. The final SmartGen model is selected according to the required ATS, communication and remote-monitoring functions.

Monitoring Functions

  • Generator voltage, current, frequency and power display
  • Engine speed, running hours and battery-voltage monitoring
  • Manual, automatic and stop operating modes
  • Start/stop status, alarm indication and event records

Protection Functions

  • Low oil pressure protection
  • High coolant temperature protection
  • Overspeed and low battery-voltage alarms
  • Over/under voltage and over/under frequency protection
  • Overcurrent and overload protection, subject to breaker selection

50Hz / 60Hz and Voltage Configuration

ConfigurationSpecification
Standard Configuration50Hz, 1500 rpm, 400/230V, 3 phase, 4 wire
Prime Rating50kW / 62.5kVA at 0.8 power factor
Standby Rating55kW / 68.75kVA at 0.8 power factor
Available Voltage Options380/220V, 400/230V, 415/240V or other project-specific voltages
60Hz OptionAvailable as a customized configuration. Final 60Hz output, voltage, alternator matching and engine speed are confirmed before order.

Please provide the installation country, local voltage, frequency, phase arrangement and load type when requesting a quotation. Motor-starting loads, UPS loads and non-linear loads should be identified in advance.

Applications

  • Commercial buildings and retail sites
  • Small factories and workshops
  • Farms, irrigation and agricultural facilities
  • Construction and temporary site power
  • Warehouses and logistics facilities
  • Telecom and utility-support installations
  • Residential and institutional backup power
  • Export projects with local voltage requirements

Optional Equipment

  • ATS cabinet or integrated ATS control
  • Additional base fuel tank or external fuel tank connection
  • Battery charger and engine water heater
  • Remote-monitoring module and communication accessories
  • Customer-logo painting and special canopy colour
  • Trailer or mobile-generator arrangement
  • Sound-level upgrade or special exhaust treatment
  • Output breaker and distribution panel
  • Cold-climate, hot-climate or dust-protection enhancement
  • Parallel / synchronizing solution after technical review

Factory Testing & Documentation

Each generator set is checked before shipment according to the approved configuration. The final test scope is agreed in the purchase order and can include the following items:

Factory Test Items

  • Visual inspection and configuration check
  • Engine start, stop, alarm and controller-function check
  • Voltage and frequency verification
  • Load test at agreed load points and duration
  • ATS functional test when ATS is included

Available Documents

  • Generator-set nameplate and specification sheet
  • Engine, alternator and controller identification details
  • Test report with agreed test conditions
  • Operation and maintenance documents
  • Packing list and agreed export documents

FAQ

Is 50kW the same as 65kVA?

No. At a 0.8 power factor, 50kW equals 62.5kVA. This generator set is rated at 50kW / 62.5kVA prime power and 55kW / 68.75kVA standby power.

Is the alternator genuine Stamford?

Yes. This generator set is specified with a genuine Stamford alternator. The exact alternator model is selected according to the final voltage, frequency and electrical rating, and is shown on the supplied alternator nameplate.

Can the silent canopy be customized?

Yes. Canopy colour, logo, fuel-tank arrangement, cable entry, maintenance access, sound-level treatment and environmental options can be customized according to the project.

Can this generator set be supplied for 60Hz?

Yes, a 60Hz version can be assessed. Because 60Hz affects engine speed, alternator selection and output rating, the final technical configuration is confirmed before quotation.

What information is needed for an accurate quotation?

Please provide required prime and standby power, frequency, voltage, phase, installation country, load type, ATS requirement, canopy requirement, quantity and expected delivery time.

Request a Quote for This Cummins Generator Set

Send your project requirements to HONGTAI for a confirmed technical configuration and commercial quotation.

  • Required prime power and standby power
  • Frequency, voltage, phase and installation country
  • Load type, including motor-starting or sensitive-load requirements
  • Silent canopy, fuel tank, ATS and remote-monitoring requirements
  • Quantity, delivery time and requested documents

Request a Technical Quotation

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer shipment

Customer visit

Customer visit

Customer visit

Customer visit

Customer visit

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Factory

Related products

undefined

undefined

Request Quote

If you have product needs, please contact us in time to get your exclusive offer.